NANOPURE 产品的特性

热学特性

Data taken from Solvay Solexis
  • Minimum 1.000hours operation expected.
  • Spectal compound reqored andtior interaner shorter term operation.

耐化学特性

Fluld type Typical example Fluorine Content FFKM° 72.5% NANOPUREⓡ产品 FKM° 66% 氟橡胶产品(VITON)
Aliphatic hydrocarbon Propane Excellent Excellent
Aromatic hydrocarbons Benzence Excellent Excellent
Organic acids Acetic acid Excellent Fair-good
Inorganic acids Sulfuric acid Excellent Excellent
Alcohols Methanol Excellent Fair-excellent
Inorganic base Sodlum hydroxide Excellent Poor-fair
Organic base Aniline Excellent Fair
Ethers MTBE Excellent Fair-poor
Ketones Acetone Excellent Poor
Nitrous oxidizers Ammonium nitrate Excellent Good
Halogen oxidizers Chlorine Excellent Excellent
Heat transfer fluids Ethylene glycol Excellent Excellent
Oils & greases Mineral oil Excellent Excellent
Halogenated refrigerants HFC - 134a Fair-good Poor-fair
Polar solvents Water Excellent Excellent
Data taken from Solvay Solexis

等离子特性

Plasma Resistance Test Conditions

  1. Picture before TestPicture before Test
  2. Picture after TestPicture after Test
  • Gas flow : 150 sccm
  • RF Power : 1100 W
  • Pressure : 400 mTorr
  • Temperature : 200℃
  • Test Time : 50 min
Contents Used Gas Gas Flow (sccm) RF Power (W) Pressure (mT) Time (min) Temp. (℃)
O2 O2 150 1100 400 50 200
O2 + CF4 O2 75 1100 400 50 200
CF4 75

O2 Plasma Resistance Test_ Nano Filler FFKM

O2 Plasma Resistance Test_ Nano Filler FFKM

O2 Plasma Resistance Test Result_ 일반 FFKM

O2 Plasma Resistance Test Result_ 일반 FFKM

O2+CF4 Plasma Resistance Test Result_ Nano Filler FFKM

O2+CF4 Plasma Resistance Test Result_ Nano Filler FFKM

O2+CF4 Plasma Resistance Test Result_ 일반 FFKM

O2+CF4 Plasma Resistance Test Result_ 일반 FFKM
   
   

压缩永久变形率

即使将 NANOPUREⓡ#9075,#9175HT产品于25%, 250℃~320℃的条件下, 压缩70小时,变形率也小于50%,仍维持作为橡胶的弹性。

영구압축변형률1영구압축변형률2


COPYRIGHT(c) 2014 MNEE股份公司. All RIGHTS RESERVED

京畿道龙仁市器兴区塔室路58号路11 TEL 301-201-7000(总机) FAX 031-201-7070

관리자